Load data for 9 mm Browning Court (.380 ACP) + .355 | 115gr | Speer TMJ

Recommended Powder(s): ReloadSwiss RS 12, Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 115gr \| Speer TMJ
Manufacturer SKU:	3995
Bullet Weight:	115gr \| 7.5g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.575" \| 14.6mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.287" \| 7.3mm
Shank Seated Depth:	0.287" \| 7.3mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B6203_C1213
Last updated:	2025-01-01

Load data for 72 loads in caliber 9 mm Browning Court (.380 ACP) with .355 | 115gr | Speer TMJ bullet and 36 powders such as ReloadSwiss RS 12, Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	80%	16984	87%	**6	94%
ADI APS 350	<<locked>>	70%	16853	86%	**1	100%
ADI APS 450	<<locked>>	70%	15650	80%	**4	100%
ADI AS 30	<<locked>>	84%	17477	89%	**3	100%
ADI AS 50N	<<locked>>	80%	16592	85%	**6	98%
Accurate Solo 1000	<<locked>>	78%	16375	84%	**4	98%
Accurate Solo 1250	<<locked>>	95%	17550	90%	**6	93%
[Alliant BULLSEYE]*	<<locked>>	75%	15490	79%	**0	84%
[Alliant UNIQUE]*	<<locked>>	93%	15418	79%	**3	84%
Baschieri & Pellagri 100	<<locked>>	84%	15824	81%	**0	96%
Hodgdon Clays	<<locked>>	70%	16766	86%	**1	100%
Hodgdon HP38	<<locked>>	64%	16882	86%	**6	95%
Hodgdon Universal	<<locked>>	88%	16984	87%	**6	94%
Lovex S011	<<locked>>	69%	16114	82%	**0	93%
[Lovex S020]*	<<locked>>	86%	15954	81%	**3	87%
Maxam CSB 1	<<locked>>	96%	16534	84%	**3	92%
Maxam CSB 2	<<locked>>	93%	12981	66%	**0	96%
Maxam CSB 3	<<locked>>	87%	16056	82%	**6	96%
Maxam CSB 4	<<locked>>	83%	15998	82%	**0	99%
Maxam CSB 5	<<locked>>	80%	17274	88%	**3	100%
Ramshot Zip	<<locked>>	63%	16317	83%	**6	94%
ReloadSwiss RS 12 👍	<<locked>>	90%	16375	84%	**5	100%
[ReloadSwiss RS 20]*	<<locked>>	95%	14982	77%	**3	84%
Rottweil P 801 👍	<<locked>>	81%	17158	88%	**2	100%
[SNPE Vectan A0]*	<<locked>>	94%	16897	86%	**7	84%
[SNPE Vectan BA 9]*	<<locked>>	82%	16244	83%	**3	89%
SNPE Vectan BA10	<<locked>>	66%	15809	81%	**4	100%
SNPE Vectan BA9 1/2	<<locked>>	88%	16853	86%	**6	92%
[Somchem MP200]*	<<locked>>	86%	16549	85%	**9	83%
[Somchem MS200]*	<<locked>>	87%	15809	81%	**7	85%
Vihtavuori N310	<<locked>>	69%	16926	86%	**0	100%
Vihtavuori N320	<<locked>>	85%	15882	81%	**6	99%
Vihtavuori N32C Tin Star	<<locked>>	94%	9224	47%	**2	99%
Vihtavuori N330	<<locked>>	92%	16723	85%	**9	94%
[Vihtavuori N340]*	<<locked>>	91%	15563	79%	**3	84%
Winchester 231	<<locked>>	71%	16317	83%	**6	94%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	61%	9761	50%	**2	85%
ADI APS 350	<<locked>>	63%	14069	72%	**5	100%
ADI APS 450	<<locked>>	64%	13358	68%	**2	100%
ADI AS 30	<<locked>>	65%	10892	56%	**5	98%
ADI AS 50N	<<locked>>	63%	10776	55%	**2	93%
Accurate Solo 1000	<<locked>>	60%	10196	52%	**6	92%
[Accurate Solo 1250]*	<<locked>>	73%	9935	51%	**2	83%
[Alliant BULLSEYE]*	<<locked>>	70%	13416	68%	**4	82%
[Alliant UNIQUE]*	<<locked>>	88%	13576	69%	**0	82%
[Baschieri & Pellagri 100]*	<<locked>>	67%	9993	51%	**9	89%
Hodgdon Clays	<<locked>>	63%	13953	71%	**5	100%
Hodgdon HP38	<<locked>>	60%	14808	76%	**4	93%
[Hodgdon Universal]*	<<locked>>	62%	8543	44%	**9	82%
[Lovex S011]*²	<<locked>>	59%	11821	60%	**9	88%
[Lovex S020]*	<<locked>>	77%	11980	61%	**8	82%
[Maxam CSB 1]*	<<locked>>	73%	9514	49%	**6	83%
[Maxam CSB 2]*	<<locked>>	71%	7440	38%	**2	85%
[Maxam CSB 3]*	<<locked>>	64%	8891	45%	**6	87%
Maxam CSB 4	<<locked>>	65%	10138	52%	**2	93%
Maxam CSB 5	<<locked>>	61%	10399	53%	**9	99%
[Ramshot Zip]²	<<locked>>	59%	14127	72%	**1	92%
[ReloadSwiss RS 12]*	<<locked>>	60%	7005	36%	**6	89%
[ReloadSwiss RS 20]*	<<locked>>	90%	13474	69%	**4	82%
Rottweil P 801	<<locked>>	62%	9602	49%	**8	97%
[SNPE Vectan A0]*	<<locked>>	88%	15243	78%	**1	82%
[SNPE Vectan BA 9]*	<<locked>>	67%	11197	57%	**9	82%
SNPE Vectan BA10	<<locked>>	60%	13343	68%	**2	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	67%	9877	50%	**9	83%
[Somchem MP200]*	<<locked>>	82%	14837	76%	**0	81%
[Somchem MS200]*	<<locked>>	77%	12415	63%	**8	81%
Vihtavuori N310	<<locked>>	63%	14156	72%	**7	100%
Vihtavuori N320	<<locked>>	63%	8499	43%	**9	90%
Vihtavuori N32C Tin Star	<<locked>>	87%	7977	41%	**3	98%
[Vihtavuori N330]*	<<locked>>	67%	8456	43%	**6	81%
[Vihtavuori N340]*	<<locked>>	86%	13547	69%	**1	81%
[Winchester 231]*	<<locked>>	62%	12372	63%	**1	89%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data